|
CALL JACO'S
MARINE TODAY AT 1-931-7626710 |
Jaco's Marine
Jerry Jaco
Phone Numbers
Hours |
Bronson King has been with Jaco's
Marine since 1992.
He is a Mercury Certified Technician and is our
Service Manager. He is the
BEST
at diagnosing
your engine needs. He and his wife Camilla have 2 daughters, Kaylee &
Kinley.
Fabian Cruz has
been with Jaco's Marine since 1996.
He is a Mercury Certified Technician,our Rigging
Specialist and Shipping and Receiving Manager.
Fabian and his wife Debra have a daughter, Ashley
Caleb Brown has been at Jaco's Marine since 2002.
He is our Front Counter and Parts Manager. He is
the first face you see at Jaco's. He is also in charge
of Propeller Sales. Give him a call and he will get
a prop out to you right away. He and Kendra are expecting their
first child in the fall.
Pete Moore has been with Jaco's Marine since 2005.
He is our Sales Manager. He and his wife Janice enjoy traveling. Pete gave Jerry his first job
in 1972 and Jerry returned the favor when Pete decided to retire
from the automotive industry. He has 2 sons Guy
and Keith and 3 grandsons Hunter, Matt.and Derrick.
From Nashville take I65 South to Saturn Pky. Saturn Pky will take you to 31 South Columbia, at the 2nd light turn right onto 43 South. 43 South brings you all the way into Lawrenceburg. We are on the north side of Lawrenceburg next to Walmart. Turn left beside white and blue Marathon station on Mattoxtown Rd. We are on the right.
From Chattanooga take I24 West to Mounteagle where you get on 64 West. 64 West brings you into Lawrenceburg. At first traffic light turn right onto Springer Rd. Follow Springer Rd until it ends. Turn left and we are on the left.
From Memphis
take 64 East all the way into Lawrenceburg. At fourth traffic light,
highway 43N, turn left. Stay on 43N all the way thru town. Go past Blockbuster
and Super Walmart and turn right at first road past Walmart.
Located the north side of Lawrenceburg
next to Super Walmart on Mattoxtown Rd
just off Highway 43
Yahoo! Maps, Driving Directions, and Traffic
CLICK ABOVE LINK FOR DIRECTIONS FROM YOUR
LOCATION
If you have any questions about directions please call 1-931-762-6710
Error Diagnostic InformationTemplate file not found. Note: If you wish to use an absolute template path (e.g. TEMPLATE="/mypath/index.cfm") with CFINCLUDE then you must create a mapping for the path using the ColdFusion Administrator. Using relative paths (e.g. TEMPLATE="index.cfm" or TEMPLATE="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible. The error occurred while processing an element with a general identifier of (CFINCLUDE), occupying document position (207:5) to (207:45). Date/Time: 05/11/08 23:02:14 |